DC-Digital, Indoor, Black Powder Coated, aluminum, factory up-timer, fingerprint resistant, pigtail junction box, white table, Industrial Up Timer, Agitator Timer System, Audible Process Timer, Production Floor Timer, Process in Progress Alert, Manufacturing Timing Solution
Count Up timer

This custom DC-60T-UP-TERM-IN Agitator Pigtail Foot Switch Controlled Up Timer was built specifically for Dow Chemicals to support one of their active workstations by acting as an agitator indicator. The goal of this system is to provide a clear, audible signal that work is currently in progress. When activated, the timer counts upward while a buzzer sounds continuously, alerting nearby workers that the workstation is active. Once the task is complete, the operator simply stops the timer using a foot switch, immediately ending both the count and the audible alert.

The system operates using pigtail wire connections that allow the customer to integrate their own foot switch as a dedicated start and stop control. When the start pigtail wires are triggered, the up timer begins counting upward and the buzzer activates at the same time. The timer continues running until the stop pigtail wires are engaged, placing the unit into stop mode. At that point, the timer can be reset either through the reset pigtail wires or by using the built-in momentary push button located on the top center of the enclosure. This setup gives operators hands-free control, making it ideal for industrial environments where efficiency and awareness are critical.

This up timer is designed with three separate pigtail wire functions to support flexible control options:

  • Start pigtail wires used to initiate the timer and buzzer
  • Stop pigtail wires used to halt the timer and silence the buzzer
  • Reset pigtail wires, which are optional since a manual reset button is built into the enclosure

Once started, the timer counts upward with high precision and visibility. It can measure up to 99 hours and 59 minutes in hundredths of a second, utilizing shift digit technology. This allows the display to automatically change formats as time increases, transitioning from seconds and hundredths of a second, to minutes and seconds, and finally to hours and minutes. This ensures accurate time tracking while keeping the display easy to read at every stage of operation.

From a hardware standpoint, this unit is built for durability and long-term industrial use. The enclosure is constructed from tough aluminum and finished with a fingerprint-resistant black powder coat. The display is large and bright, making it easily visible from long distances on the production floor.

Key hardware and performance specifications include:

  • Aluminum, black powder-coated industrial enclosure
  • Enclosure dimensions: 16 inches wide, 7 inches tall, 3 inches deep
  • 6-inch LED display viewable from up to 300 feet away
  • Four-digit display capable of counting up to 99 hours and 59 minutes
  • Seven-segment display made from 5 mm oval red LEDs
  • Shift digit timing technology for automatic format changes
  • Integrated audible buzzer for agitator and process-in-progress alerts

Power is supplied through a 120–240 VAC, 3-prong grounded, 6-foot power cord, which is securely grounded to the enclosure. While this model typically includes a junction box for pigtail connections, this custom order uses the grounded power cord configuration to meet Dow Chemicals’ specific requirements. For mounting, the enclosure features two slotted teardrop mounting tabs on the back, allowing for quick and secure wall installation. A pigtail wire junction box is mounted on the left side of the enclosure for clean and organized wiring connections.

This custom DC-60T-UP-TERM-IN up timer provides Dow Chemicals with a reliable, highly visible, and audible solution for indicating active processes at their workstation. Its foot switch control, precision timing, and rugged construction make it a practical tool for improving workflow awareness and operational safety in demanding industrial environments.

See Product: DC-60T-UP-TERM-IN

See tutorial video on YouTube

See DC-Digital Store

Contact us

No Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Competition Timer, Sporting Event Timer, Dog Racing Timer, Sheepdog Competition Timer, Sunlight Resistant Display, Waterproof LED Display, Competitive Event Timing, Outdoor Sports Timing
Clocks
Soldier Hollow Sheepdog Classic Utilizes Portable Wireless Countdown Timer for Outdoor Dog Racing & Herding Contests

See product: DC-80UTW-BTC The Soldier Hollow Sheepdog Classic utilizes the DC-Digital DC-80UTW-BTC Multifunction Timer to provide accurate, highly visible timekeeping for its competitive dog racing and sheep herding contests. With events that require participants and their dogs to complete timed challenges, having a dependable timing display is essential for keeping …

Industrial Up Timer, Elapsed Time Counter, PLC Controlled Timer, Production Timing Display, Multi Input Timer, 200 Foot Visibility, Manufacturing Process Timer, PNP Sensor Input, Custom LED Timer
Count Up timer
Pan Oston Installs Heavy Duty LED Elapsed Time Display For Maintaining Machine Run-Time

See product: DC-406T-UP-TERM Pan Oston recently purchased and installed DC-Digital’s DC-406T-UP-TERM Industrial Up Timer, adding a versatile, precision timing display to their operation. Designed for applications requiring accurate run-time tracking. This industrial timer provides multiple input options, a wide counting range, and a durable construction suited for demanding environments. Following …

Production Timer, Food Processing, Three Color Signal, LED Status Indicator, HACCP Countdown Timer, Wired Timer Controller, Production Status Light, Hopper Loading Control, Material Handling Control
Countdown Timer
Food Manufacturing Timer System with Master Controller & Secondary Push Button

See similar product: DC-25T-DN-BCD-NEMA-EOP DC-Digital’s custom-built DC-25T-DN-BCD-NEMA-EOP Master Secondary Countdown Timer is designed to help HB Food Specialty coordinate production activities between separate processing and packaging areas. This specialized timer system combines programmable countdown timing, master-secondary controls, and visual status indicators to help manage the movement of materials through an …