(DC-150N-T-DN-UP-Static-IN) 15 Inch LED Digital, Network Connected, Web Page Controlled, Count Up timer, Countdown Timer, Time of Day Clock and Static Number Display (INDOOR)

More Details

 
Video shows DC-40N-T-DN-UP-STATIC and may vary from this specific model
• PLC, computer, tablet, cell phone controlled through network (addressable up to 676 displays)
• No software subscriptions needed, simply send the ascii data string code to the displays IP address (see Network Data Protocol for further information)
• Displays can count up, countdown, static numbers, time of day clock
• DHCP or Static IP programmable (ships DHCP)
• 750 Feet viewing distance
• Heavy duty 14 Ga. all aluminum enclosure
• Wide viewing angle, LED digits
• 1, 2.3, 4, 6, 8, 30 Inch LED Digit heights available
• Customizable to fit any of your clock needs: Contact us!

Tech Notes:
• Function: Network connected and controlled simply send ascii data code via UDP or TCP to the displays IP. The displays are fully addressable up to 676, and can be utilized as a count up timer (MM:SS), countdown timer (MM:SS), static number display (with or without middle decimal point or colon), and time of day clock (12-24 Hour)
• Control operations: Network - DHCP or Static IP (user programmable through included IP I.D.software). A two letter addressing protocol allows 676 displays to be controlled from one IP address. Up to 26 groups each with up to 26 displays in each group.
• Computer, tablet, cell-phone or PLC: Send code via telnet, terminal program, virtual com port, displays hosted web page, PLC, crestron controller, 3rd party controller etc.. See Network Data Protocol and Setup Page for setup and codes
• Control connection: Ethernet RJ-45 connector mounted on the side of the enclosure
• Power: 100-240VAC, 50/60Hz, @ 3 amps, grounded 3 prong 6ft. power cable (optional junction box with pigtails)
• Digit type: (4) x 7 Segments made up of individual 5mm oval, 110 x 40 degree viewing angle, 1100 mcd sunlight resistant red LED 621nm (adjusted for indoor use)
• Number height, actual: 15 inches / 381 mm
• Viewing distance: 750 feet / 228.6 Meters
• Enclosure: Tough extruded aluminum, fingerprint resistant, black powder coated
• Dimensions: 48 inches wide x 19 inches tall x 3-1/4 inches deep
• Mounting: (2) aluminum .125 inch x 1.5 inch x .75 inch C channel mounting rails (see spec. sheet 2D drawings)
• Timing accuracy: Quartz (factory calibrated to +/- .0005 pps, @ 10Mhz) (free runs if server becomes off line)
• Manufacturer: DC-Digital, Made in the USA