Different Types of Hand Washing Timers with Hands-Free Activation

Timers

Help prevent Covid-19 with a series of hand washing timers. Contact us for customization options on all of these timers! The activation method, case type, power type, timer value set method, and more can be customized to your home, school, or business needs.

DC-10T-DN-HAND

Battery operated and designed to last over 20,000 20-second handwashing cycles in a high use environment, this timer is sealed in a NEMA 4X rated enclosure to ensure maximum protection from liquid. This case can be mounted on the wall or set on the counter next to the sink and is portable. The timer duration is easily adjustable with DIP Switches inside the case. The timer remains off until activated with a close range motion sensor to increase battery life. Features a 3 second end-of-period beep to help signal when the timer is done.

Factory Standard Features:

Activation Method – Motion Sensor

Case Type – NEMA 4X

Power Type – Rechargeable 12V 5Ah Battery

Timer Value Set Method – 6 position DIP Switch with preset values

https://dc-digital.com/store/DC-10T-DN-Hand-Sensor-Activated-Hand-Washing-Digital-Countdown-Timer-NEMA-4X-1-Inch-LEDs.html

DC-10T-DN-HAND-FOOT

This timer functions similarly to the DC-10T-DN-HAND but comes with different hardware features. This timer runs power wires out the back of the case (connections made inside the case) to offer a permanent setup that doesn’t need to be adjusted once mounted. The front of the case is foamed and all knockout holes are covered in silicone on the inside to make the case more water resistant to splashes. The display remains on and displays 0:00 when not running. The timer resets to the DIP switch value and starts the timer when the foot switch is pressed if it was not already running. Features a 3 second end-of-period beep to help signal when the timer is done.

Factory Standard Features:

Activation Method – Foot Switch

Case Type – Powder Coated IP-66 Aluminum

Power Type – PS-12-700,120-240 Vac power U.L listed wall adapter w/6ft. cord

Timer Value Set Method – 6 position DIP Switch with preset values

https://dc-digital.com/store/DC-10T-DN-Hand-Foot-Switch-Activated-Hand-Washing-Digital-Countdown-Timer-1-Inch-LEDs.html

DC-10T-DN-BCD-FOOT-EOP

Instead of using DIP switches with preset values, this timer uses four BCD switches on the top of the case. Each digit on the display can be set individually from 0 to 9 so that any custom time needed can be displayed. Pressing the foot switch resets the timer to the BCD value and restarts the timer. Features a 3 second end-of-period beep to help signal when the timer is done.

Factory Standard Features:

Activation Method – Foot Switch

Case Type – Powder Coated IP-66 Aluminum

Power Type – PS-12-700,120-240 Vac power wall adapter w/6ft. cord

Timer Value Set Method – BCD Switches

https://dc-digital.com/store/DC-10T-DN-BCD-FOOT-EOP-DC-Digital-1-Inch-LED-BCD-Rotary-Switch-Set-Foot-Switch-Controlled-Digital-Countdown-Process-Timer-EOP-Buzzer.html

DC-10T-UP-FOOT

Rather than using a preset timer value, the DC-10T-UP-FOOT starts an upwards counting timer from zero when the foot switch is pressed. This allows for the timer to be used for standard 20 second hand washes and longer surgery scrubs without needing to adjust any timer values. The foot switch performs three functions in a cycle: start, stop, and reset to zero. This timer does not have an end-of-period beep.

Factory Standard Features:

Activation Method – Foot Switch

Case Type – Powder Coated IP-66 Aluminum

Power Type – PS-12-700,120-240 Vac power wall adapter w/6ft. cord

Timer Value Set Method – Foot Switch (counts up)

https://dc-digital.com/store/DC-10T-UP-FOOT-DC-Digital-1-Inch-LED-Foot-Switch-Controlled-Digital-Count-Up-Process-Timer.html

Contact us to speak with a sales rep for additional customization options and for more information about the products we offer.

No Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Factory Timer, Industrial Timer, Countup Timer, Digital Timer, Manufacturing Timer, Cycle Timer, Process Timer, LED Timer, Factory Monitoring, Factory Production Timer, Manufacturing Cycle Timer
Count Up timer
Programmable Industrial Timer for Factory Production Monitoring & Process Improvement

See product: DC-40T-UP-BCD-ANDON-HORN-WR Manufacturing facilities rely on accurate production monitoring to maintain consistent output, identify inefficiencies, and improve workflow performance. For companies such as Ply Gem, keeping track of the number of products manufactured during each production cycle is an important part of understanding production performance. To support this application, …

Competition Timer, Sporting Event Timer, Dog Racing Timer, Sheepdog Competition Timer, Sunlight Resistant Display, Waterproof LED Display, Competitive Event Timing, Outdoor Sports Timing
Clocks
Soldier Hollow Sheepdog Classic Utilizes Portable Wireless Countdown Timer for Outdoor Dog Racing & Herding Contests

See product: DC-80UTW-BTC The Soldier Hollow Sheepdog Classic utilizes the DC-Digital DC-80UTW-BTC Multifunction Timer to provide accurate, highly visible timekeeping for its competitive dog racing and sheep herding contests. With events that require participants and their dogs to complete timed challenges, having a dependable timing display is essential for keeping …

Industrial Up Timer, Elapsed Time Counter, PLC Controlled Timer, Production Timing Display, Multi Input Timer, 200 Foot Visibility, Manufacturing Process Timer, PNP Sensor Input, Custom LED Timer
Count Up timer
Pan Oston Installs Heavy Duty LED Elapsed Time Display For Maintaining Machine Run-Time

See product: DC-406T-UP-TERM Pan Oston recently purchased and installed DC-Digital’s DC-406T-UP-TERM Industrial Up Timer, adding a versatile, precision timing display to their operation. Designed for applications requiring accurate run-time tracking. This industrial timer provides multiple input options, a wide counting range, and a durable construction suited for demanding environments. Following …