Drive-Thru Customer Wait Timer & Vehicle Counter System using Pneumatic Switches

Count Up timer

The DC-256C-T-UP-PNEUMATIC-PKG-DRIVE-THRU system consists of two coordinated units: a master unit and a secondary unit. Both are enclosed in durable, black powder-coated housings that resist fingerprints and dust, ensuring long-term visual clarity and minimal maintenance.

Each unit is powered by a standard wall-prong power adapter and features a digital LED display with six digits:

– Two red LED digits dedicated to the up-timer portion, capable of counting up to 99 seconds.

– Four green LED digits representing the customer counter, which can count up to 9999.

The master unit includes two push button switches located on the top of the enclosure:

– The first button is used to stop the up-timer manually.

– The second button is used to reset both the up-timer and the customer counter back to zero.

Operation: The system operates using two pneumatic air hoses, each 20 feet in length, connected to their respective pneumatic switches.

Initial Activation: When a vehicle drives over the first air hose, the pneumatic switch is triggered. This activates both the master and secondary units simultaneously. The customer counter increments by one. The up-timer begins counting upward from zero to 60 seconds.

Visual Alert at 20 Seconds:

At the 20-second mark, the red LED digits begin to flash. This visual cue alerts staff that it is time to deliver the order to the customer who has already completed payment.

Pause Trigger:

After receiving their meal, the customer drives over the second air hose, which is connected to the secondary enclosure. This action pauses the up-timer, marking the end of that transaction cycle.

Next Customer:

As the next vehicle drives over the first air hose, the up-timer resets to zero and begins again, while the customer counter increments by one. The cycle then repeats.

Key Features:

Synchronized Display: Both units reflect identical counts and timing in real time.

Clear Visual Indicators:

2.3-inch LED digits provide high visibility for both counter and timer.

Hands-Free Operation:

All timing and counting functions are triggered automatically via pneumatic switches.

Manual Override Controls:

The master unit includes two accessible push buttons—one to stop the timer and one to reset both the timer and counter.

Durable Construction:

Enclosures are designed to withstand daily use in demanding environments.

Conclusion:

The DC-256T-UP-C-TERM-DRIVE-THRU unit is a practical solution for optimizing drive-thru service performance. By integrating visual time tracking with customer counting, it helps staff manage service expectations and maintain a steady operational rhythm, ultimately enhancing the customer experience.

See Video: Drive Thru Timer-Counter

DC-Digital Counters

DC-Digital Store

Contact us!

No Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

DC-Digital, Lightbulb Testing Down-Timer, Foot Controlled Countdown Timer, Lumen Measuring Lab Timer,Product Testing Downtimer,Accurate Light Measurement, Custom Built to Order Timer
Countdown Timer
Lumens Testing Made Easy with Foot Switch Countdown Timer for Electronic Manufacturing

When Kimball Electronics reached out for a timer that would assist them in creating, DC-Digital answered with their newest model. Our latest custom order, the DC-10T-DN-BCD-FOOT-HI-EOP, was designed for a client who needed a precise way to measure the brightness inside light bulbs within a specific timeframe. This countdown timer …

Outdoor Temperature Sensor, Factory Temperature Unit, Industrial Temperature Display, Fahrenheit & Celsius, Industrial Made Temperature Unit
Number Displays
Large Area Temperature Metering Safety Display for Industrial and Commercial Use

Today, we’re showcasing our new DC-150-TEMP, a reliable and highly visible temperature display designed for use alongside our GPS time-only clock. ADP has reached out to DC-Digital for the goal of manufacturing a simple setup to provide a clear, accurate display of both temperature and time within the same room. …

DC-Digital, Industrial Display for Metal Cutting Accuracy, Wired, Remote Keypad Display, Metal Tolerance Control Display, Factory Measurement Display
Keypad Controlled
Improve Accuracy for Metal Fabrication Production using our Specific Tolerance Display with Easy Remote Keypad Controls

Vallen Integrated Supply has reached out to DC-Digital for their custom industrial, static numbers display that would inform metal workers the tolerance in which metals can be cut. in Introducing our DC-406-Triple-Static-Key, a custom-built display unit designed to help factories maintain precise control over metal cutting tolerances. This innovative system …