More Details
• Counts up to 999999
• RF wireless remote control and wired remote control, Increment, Decrement, Reset to Zero (Set; wireless controls only)
• 400 Feet viewing distance
• Heavy-duty extruded aluminum enclosure
• Wide viewing angle, LED digits
• Available in All of our Digit Sizes
• Customizable to fit any of your counting needs: Contact-Us
Tech Notes:
• Functions: Counts up to 999999
• Control Operation: RF Wireless controls: Increment, Decrement, Zero Reset, Set. Wired controls: Increment, Decrement, Zero Reset
• Control Type: RF Wireless controls: 2.4 GHz RF wireless handheld controller with 150+ ft. range and membrane switches. Wired controls: PNP or contact closure connected to pigtails inside junction box on the enclosure side.
• Power: 100-240VAC, 50/60Hz, @ 3-amps with grounded 3-prong 6ft power cable (junction box with pigtails optional)
• Digit type: 7 Segments made up of individual 5mm oval, 110x40-degree viewing angle, 1100 mcd sunlight-resistant red LED 621 nm (adjusted for indoor use)
• Viewing distance: 400 feet / 203 Meters
• Number height: 8 inches / 121.9mm
• Enclosure: Tough extruded all-aluminum, fingerprint-resistant, black powder-coated
• Dimensions: 35-1/2 inches wide x 11-1/2 inches tall x 3-1/4 inches deep
• Mounting: Slotted teardrop mounting tabs (see spec. sheet 2D drawings), handle and tripod mounting optional
• Audible: Optional
• Timing accuracy: Our Displays are calibrated using HP Frequency Counters, which are calibrated using a GPS-disciplined, oven-controlled, crystal-based 10MHz master oscillator. Each frequency counter is calibrated to 10,000,000Hz (±500)Hz. Using the same freq. counter to calibrate each display board's 10MHz crystal to a divided and filtered output reference square wave of 500Hz (±.002)Hz. This equates to approximately ±2 minutes or ±126.14 seconds per year when free running.
• Manufacturer: DC-Digital, Made in the USA



