(DC-25T-DN-W-HOURS) 2.3 Inch LED Digital, RF-Wireless Remote Controlled, Countdown Timer, Hours until Machine Maintenance

(DC-25T-DN-W-HOURS) 2.3 Inch LED Digital, RF-Wireless Remote Controlled, Countdown Timer, Hours until Machine Maintenance

DC-Digital $503.95503.95 SKU# DC-25T-DN-W-HOURS
Qty
DC-25T-DN-W-HOURS (DC-25T-DN-W-HOURS) 2.3 Inch LED Digital, RF-Wireless Remote Controlled, Countdown Timer, Hours until Machine Maintenance DC-Digital

More Details


• Counts down from 999 hours
• Display flashes when 00:00 has been reached (other optional outputs and EOP indicators available)
• RF wireless remote controls
• 120 Feet viewing distance
• Wide viewing angle, LED digits
• Available in All of our Digit Sizes
• Customizable to fit any of your timing needs: Contact-Us
• List of options include:
   • Red/Green LED
   • Additional Controller
   • IP-66 Aluminum or NEMA 4x  Polycarbonate Enclosure
   • 1-Year Calibration or NIST Traceable Certificate
   • 1-Year, 3-Year, 5-Year or Lifetime Warranty

Tech Notes:
• Functions: Counts down from 999 hours to hundredths of second
• Control operation: Start-Stop, Reset to Last Value, Reset to Zero, Set Hours
NOTE: Retains the last set value after removal of power.
• Control type: RF-Wireless; LoRa Radio Frequency (902–928 Mhz) Remote Control Module, FCC tested and certified per CFR Title 47 Ch.1 15.245
• Range: 1500+ feet outdoor, 300+ feet indoor (top mounted push-buttons optional) 
• End of period: Display flashes 1/2 second ON, 1/2 second OFF once 00:00 (end of period has been reached (optional end of period indicators: flashing count up overage time, ANDON light, tone, relay outputs)
• Power: PS-12-700,120-240Vac @ 700 mA power wall adapter w/6ft. cord
• Digit type: (4) Super bright bar type 7 segment red LED 621nm
• Number height actual: 2.3 inches / 58.42 mm
• Viewing distance: 120 feet. / 36.5 Meters
• Enclosure: Tough IP-60, 14 gauge all aluminum, textured fingerprint resistant black powder coated (harsh environment enclosures available in product cart options above)
• Dimensions: 9-3/4 inches wide x 4-3/4 inches high x 3 inches deep
• Mounting: 4 X 4  or 2 X 4 electrical rough in box, slotted teardrop (see spec. sheet 2D drawings)
• Audible: Optional
• Timing accuracy: Our Displays are calibrated using HP Frequency Counters, which are calibrated using a GPS-disciplined, oven-controlled, crystal-based 10MHz master oscillator. Each frequency counter is calibrated to 10,000,000Hz (±500)Hz. Using the same freq. counter to calibrate each display board's 10MHz crystal to a divided and filtered output reference square wave of 500Hz (±.002)Hz. This equates to approximately ±2 minutes or ±126.14 seconds per year when free running.
• Manufacturer: DC-Digital, Made in the USA
• Warranty: 1 Year (optional extended warranty plan @ checkout)

Recently Viewed

Customers who bought this item also bought