(DC-256T-UP-ANDON-PROCESS) Single Process Progression Timer, 3 Color Status LED ANDON, Wired Remote Controls, Key Switch Reset, 6-Digit, 2.3 Inch LED Numerals
DC-Digital $1,404.951404.95 SKU# DC-256T-UP-ANDON-PROCESSMore Details
• Timers count up to 99 hours 59 minutes 59 Seconds
• Remote controls for easily changing process timing conditions: "Working", "Idle", "Problem"
• 3 Color ANDON LED: RED (Problem), GREEN (Working), YELLOW (Idle)
• Key switch master reset to 00:00:00
• Internal terminal blocks for easy connections
• Heavy-duty 14 Ga. all-aluminum enclosure
• Wide viewing angle, LED digits
• Available in All of our Digit Sizes
• Customizable to fit any of your counting needs: Contact us!
Tech Notes:
• Function: x3 Timers in x1 enclosure to provide a production process elapsed time progression. Each timer will count up to 99:59:59 (hours, minutes, and seconds)
• Control Function: x3 environmentally sealed 12mm momentary push-button switches for starting either the "Working", the "Idle," or the "Problem" timers. Note: Once any one of the timers has been started, to stop that timer, one of the other condition timers must be started by pressing the associated push-button. Only the reset to zero key switch will cause all of the timers to stop, be zeroed, and wait for the next process.
• Control type: Momentary push-button switch box with 25ft control cabling, and weatherproof box, 12mm environmentally sealed push buttons, and cover plate (preassembled and ready for cable connection to timers terminal block).
• Additional Visual Progress Indication: 3-Color LED ANDON; Green for "Working", Yellow for "Idle," and Red for "Problem".
• Power: 120Vac-240Vac, 50-60Hz, @ 2-amp, 3-Prong, 6ft power cord
• Digit type: Super bright, 7-segment, bar type, red LED 660nm
• Number height, actual: 2.3 inches / 58.42mm
• Viewing distance: 120Ft. / 36.5 Meters
• Enclosure: Tough 14-gauge aluminum, fingerprint-resistant black powder coating on all extruded aluminum enclosure
• Dimensions: 19.75 inches wide x 15.75 inches tall x 2.25 inches deep
• Mounting: Adjustable slotted teardrop tabs or table mount (rubber feet provided)
• Timing accuracy: Our Displays are calibrated using HP Frequency Counters, which are calibrated using a GPS-disciplined, oven-controlled, crystal-based 10MHz master oscillator. Each frequency counter is calibrated to 10,000,000Hz (±500 Hz). Using the same freq. counter to calibrate each display board's 10MHz crystal to a divided and filtered output reference square wave of 500Hz (±.002)Hz. This equates to approximately ±2 minutes or ±126.14 seconds per year when free-running.
• Manufacturer: DC-Digital, Made in the USA
• Warranty: 1-Year (optional extended warranty plan @ checkout)
Recently Viewed
Customers who bought this item also bought
157.95

