More Details
Video demonstrates wireless static display which has similar components
• Complete RF-Wireless controlled count up by days kit that can be installed into signage
• 2.3" 4-digit LED display with aluminum backbox, lens, and hardware
• RF wireless handheld controller and receiver range: 1500 feet outdoor, 300 feet indoor
• Handheld battery operated controller with membrane keypad and belt clip
• Receiver is enclosed in environmentally sealed poly-carbonate case with 25ft. 22ga. data cable and modular connector for easy connect
• 120 Feet viewing distance
• Wide viewing angle, LED digits
• Can be easily customized to fit any of your counting needs: Contact-Us
Tech Notes:
• Functions: Displays elapsed days (increment every 24 hours)
• Control type: RF-Wireless transmitter & receiver; LoRa Radio Frequency (902–928 MHz) Remote Control Module, FCC tested and certified per CFR Title 47 Ch1 15.245, Increment, Decrement, SET, 0 (for reset to zero)
• Power: PS-12-700,120-240 Vac power wall adapter w/6ft. cord
• Power backup: x2 AA Alkaline batteries (not included)
• Digit type: x4 Super bright bar type 7 segment red LED 621nm
• Number height, actual: 2.3 inches / 58.42mm
• Viewing distance: 120 feet / 36.5 Meters
• Enclosure: All aluminum back box enclosure with protective acrylic red lens and mounting hardware
• Dimensions: 8-inches wide x 4-5/8 inches tall x 1-1/4 inches deep
• Timing accuracy: Our Displays are calibrated using HP Frequency Counters, which are calibrated using a GPS-disciplined, oven-controlled, crystal-based 10MHz master oscillator. Each frequency counter is calibrated to 10,000,000Hz (±500)Hz. Using the same freq. counter to calibrate each display board's 10MHz crystal to a divided and filtered output reference square wave of 500Hz (±.002)Hz. This equates to approximately ±2 minutes or ±126.14 seconds per year when free running.
• Mounting: x4 Nylon 6-32 machine screws
• Warranty: 1-Year (optional extended warranty plan @ checkout)


