(DC-150-Static-Key-In) 15.0 Inch LED Digital, Wired Remote Keypad Controlled, Static Number Display (Indoor)

(DC-150-Static-Key-In) 15.0 Inch LED Digital, Wired Remote Keypad Controlled, Static Number Display (Indoor)

DC-Digital $1,816.951816.95 SKU# DC-150-Static-Key-In
Qty
DC-150-Static-Key-In (DC-150-Static-Key-In) 15.0 Inch LED Digital, Wired Remote Keypad Controlled, Static Number Display (Indoor) DC-Digital

More Details

• 24 Key wired keypad
• Instantly display numbers or static time
• Easily toggle between modes with a single button
• 750 Feet viewing distance
• Heavy duty 14 Ga. all aluminum enclosure
• Wide viewing angle, LED digits
• 1, 2.3, 4, 6, 8, 30 Inch LED Digit heights available
• Customizable to fit any of your clock needs: Contact-Us

Tech Notes:
Function: Static non active: Displays 4 digits with or without colon for time or numbers 
Control operations: Press "Set", enter number(s), press "Enter". Press 00:00, 0000 to toggle between time or number format. Note: Number format will take leading 0's
Control type: 24 Key pre-programmed keypad (Customizable to fit your needs), with 25 feet of cabling
Power: 120-240Vac, 50/60Hz, @3 amps, 3 Prong 6 ft. Power cord (Junction box with pigtails for 100-240VAC, 50/60Hz, @ 3 amps with ground optional)
Digit type: (4) x 7 Segments made up of individual 5mm oval, 110 x 40 degree viewing angle, 1100 mcd sunlight resistant red LED 621nm (adjusted for indoor use)
Number height actual: 15 Inch / 381 mm 
Viewing distance: 750 feet / 228.6 Meters
Enclosure: Tough extruded aluminum, fingerprint resistant, black powder coated (IP-66 outdoor wet location waterproof enclosure optional)
Dimensions: 48 inches wide x 19 inches tall x 3-1/4 inches deep
Mounting: (2) aluminum .125 inch x 1.5 inch x .75 inch C channel mounting rails (see spec. sheet 2D drawings)
• Timing accuracy:Quartz (factory calibrated to +/- .0005 pps, @ 10Mhz)
• Manufacturer: DC-Digital, Made in the USA

Recently Viewed