More Details
• RF-Wireless Communication Link (Master Transmitter Required, DC-MT-USB-W)
• Addressable up to 676 displays
• Zero Proprietary Software Required
• Developer-Ready: Open Source ASCII protocol over RS-232/RS-485 integrates with Python, C++, or Node.js
• Interfaces with your Arduino, Raspberry Pi, or ESP32
• Counts Up, Counts Down, Static Numbers, Time of Day
• 25 Feet viewing distance
• Heavy duty 14 Ga. all aluminum enclosure
• Wide viewing angle, LED digits
• Available in All of our Digit Sizes
• Customizable to fit any of your clock needs: Contact-Us
• List of options include:
• End of Period 3 Second Buzzer, Flashing Andon Light w/ Adjustable Piezo
• IP-66 or NEMA 4X enclosures
• 1-Year Calibration or NIST Traceable Certificate
• 1-Year, 3-Year, 5-Year or Lifetime Warranty
Tech Notes:
• Function: RF-Wireless controlled (addressable), count up timer (MM:SS), countdown timer (MM:SS), static numbers (with or without middle decimal point or colon), and time of day (12-24 Hour)
• Control operations: RF-Wireless; LoRa Radio Frequency (902–928 Mhz) Remote Control Module, FCC tested and certified per CFR Title 47 Ch.1 15.245 (1500 ft. range outdoor, 300 ft. range indoor) DC-MT-USB-W required. A two letter addressing protocol allows 676 displays to be controlled from one com port. Up to 26 groups each with up to 26 displays in each group.
• Data Code: DC-Digital protocol (Serial Data Protocol), use any terminal program or a simple one like this: Termite
• Power: PS-12-700,120-240 Vac power wall adapter w/6ft. cord
• Digit type: (4) Super bright, bar, red 660nm LEDs
• Number height, actual: 1 inch / 25.5mm
• Viewing distance: 25 feet / 7.62 Meters
• Enclosure: Tough 14 Ga. aluminum, fingerprint resistant, black powder coated (NEMA 4X enclosure available)
• Dimensions: 6-3/4 inches wide x 3-3/4 inches tall x 2 inches deep
• Mounting: (2) Slotted teardrop K.O.'s (see spec. sheet 2D drawings)
• Timing accuracy: Our Displays are calibrated using HP Frequency Counters, which are calibrated using a GPS-disciplined, oven-controlled, crystal-based 10MHz master oscillator. Each frequency counter is calibrated to 10,000,000Hz (±500)Hz. Using the same freq. counter to calibrate each display board's 10MHz crystal to a divided and filtered output reference square wave of 500Hz (±.002)Hz. This equates to approximately ±2 minutes or ±126.14 seconds per year when free running.
• Manufacturer: DC-Digital, Made in the USA
• Warranty: 1 Year (optional extended warranty plan @ checkout)





