Easy, Battery Operated Portable Hand Washing & Surgery Scrub Adjustable Timer

DC-Digital. Handwashing, Countdown, Portable, Hospital, Cleanroom, Diffused Reflective Area Sensor, White Table, 10 inch display, Hand Wash Timer, NEMA 4X Enclosure, Healthcare Hygiene Timer, Sink Mounted Timer, Sanitation Timing Device, Industrial Wash Timer, IP66 Rated Timer
Countdown Timer
4

The DC-10T-DN Hand Washing Timer is a fully portable, battery-operated countdown timer engineered to support proper handwashing and surgical scrub protocols in demanding hygiene environments. Designed for reliability and ease of use, this unit activates with a simple wave of the hand, ensuring hands-free operation that helps reduce cross-contamination. The integrated diffused reflective area sensor detects motion up to 10 inches away, instantly starting the preset countdown without requiring physical contact.

Once activated, the timer begins counting down using bright, one-inch red LED digits that are clearly visible from up to 25 feet away. During operation, the sensor is intelligently controlled to prevent retriggering. If a hand passes in front of the sensor while the countdown is in progress, the timer will not restart. This allows the unit to be mounted close to sinks without concern for accidental resets during normal washing motion. At the end of the countdown period, a three-second audible alert signals completion. Following the audible alert, the sensor enters a brief five-second lockout period, allowing users to remove their hands from the sink area without unintentionally restarting the timer.

Time settings are fully adjustable through internal dip switches. The unit can be configured in 15-second increments ranging from 15 seconds up to 7 minutes and 45 seconds. An additional dip switch provides a five-second add-on feature, allowing precise time customization to meet specific hygiene requirements. This flexibility makes the DC-10T-DN adaptable for standard handwashing cycles as well as longer surgical scrub procedures.

Housed in a rugged polycarbonate enclosure rated IP-66 and NEMA 4X, 6, 6P, 12, 12K, and 13, the DC-10T-DN is built to withstand wet and washdown environments. Its sealed design protects internal components from water exposure, making it ideal for installation near sinks, scrub stations, food preparation areas, and medical facilities.

Power is supplied by a 12-volt lithium rechargeable battery designed for long service life. After a full 24-hour charge, the battery can operate for approximately three months under normal usage conditions. Heavy-use cycle testing has demonstrated exceptional durability, with over 20,000 cycles completed without requiring recharge.

The DC-10T-DN offers flexible installation options to suit a wide range of facilities. It can be wall-mounted for permanent placement or used as a portable unit that can be relocated as needed.

Key Features and Capabilities:

  • One-inch red LED display visible up to 25 feet
  • Adjustable countdown via internal dip switches from 15 seconds to 7 minutes 45 seconds
  • Additional five-second increment option for fine-tuned timing
  • Hands-free activation with diffused reflective sensor (up to 10-inch detection range)
  • Anti-retrigger protection during countdown
  • Three-second end-of-cycle audible alert
  • Five-second post-cycle sensor lockout
  • 12-volt lithium rechargeable battery with long runtime
  • Polycarbonate IP-66 and NEMA 4X rated waterproof enclosure
  • Wall-mountable or portable configuration

The DC-10T-DN Hand Washing Timer provides a dependable, hands-free solution for ensuring consistent hygiene timing compliance, combining durability, visibility, and programmable flexibility into one compact, water-protected unit.

See Product: DC-10T-DN-Hand

Watch tutorial video on YouTube

See DC-Digital Store

Contact us

4 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Competition Timer, Sporting Event Timer, Dog Racing Timer, Sheepdog Competition Timer, Sunlight Resistant Display, Waterproof LED Display, Competitive Event Timing, Outdoor Sports Timing
Clocks
Soldier Hollow Sheepdog Classic Utilizes Portable Wireless Countdown Timer for Outdoor Dog Racing & Herding Contests

See product: DC-80UTW-BTC The Soldier Hollow Sheepdog Classic utilizes the DC-Digital DC-80UTW-BTC Multifunction Timer to provide accurate, highly visible timekeeping for its competitive dog racing and sheep herding contests. With events that require participants and their dogs to complete timed challenges, having a dependable timing display is essential for keeping …

Ethernet Digital Clock, Large Digit Clock, Time Zone Configuration, Ethernet Powered Display, Waterproof Industrial Display, IP66 Waterproof Clock, Web Configurable Clock, Red LED Digit
Clocks
Ethernet NTP-Synchronized LED Clock with 6-Inch Digits for Industrial Facilities

See product: DC-60N-POE-NEMA Emmi Roth has incorporated DC-Digital’s DC-60N-POE-NEMA Network-Synchronized Time of Day Display into its facility to provide a clear, reliable way to view the current time using its own Ethernet network. By connecting the display to its existing network infrastructure, Emmi Roth can synchronize the displayed time with …

Industrial Up Timer, Elapsed Time Counter, PLC Controlled Timer, Production Timing Display, Multi Input Timer, 200 Foot Visibility, Manufacturing Process Timer, PNP Sensor Input, Custom LED Timer
Count Up timer
Pan Oston Installs Heavy Duty LED Elapsed Time Display For Maintaining Machine Run-Time

See product: DC-406T-UP-TERM Pan Oston recently purchased and installed DC-Digital’s DC-406T-UP-TERM Industrial Up Timer, adding a versatile, precision timing display to their operation. Designed for applications requiring accurate run-time tracking. This industrial timer provides multiple input options, a wide counting range, and a durable construction suited for demanding environments. Following …