(DC-25T-UP-PKG) Industrial LED Digital Count Up Timer Display Package, 2.3 Inch LED Display, Diffused Reflective Sensor (10 ft. range), Remote Controls

$539.95
SKU# DC-25T-UP-PKG
Qty
Share on Facebook

This is a complete count up timer package system. It comes with all you need to set up, install and start timing any process that requires single process time or accumulated process time. Heavy duty 14ga. all aluminum enclosing a 2.3 inch high, 4 digit display. Fully assembled and factory calibrated electronics, diffused reflective sensor (adjustable 10ft. range), reset to zero switch, cabling, mounts, cabling restraint and power supply. All USA made! Need customization? Contact-Us

Tech Notes:
Display:
Function: Counts up from hundredths of a second to 99 hours
Control activation: Terminal 1:  Start/Pause, Terminal 2:  Reset to Zero, Terminal 3: Reset to Zero and Start
Control Input Sensor: PNP sourced, triggers once object is sensed and maintains until object is moved. Connects to terminal 1
• Control Input Reset Switch: Momentary contact closure to reset to zero. Note: will not reset if sensor is outputting. Connects to terminal 2
• Number height: 2.3 inches / 58.42mm
• Viewing distance: 120 feet / 36.5 Meters
• Enclosure: Powder coated 14 gauge aluminum enclosure (NEMA 4X enclosure available)
• Mounting: (2) Slotted tear drop K.O.'s (see spec. sheet 2D drawings), Tripod mounting
 Dimensions: 9-3/4 inches wide x 4-3/4 inches tall x 3 inches deep
• Power: PS-12-700,120-240 Vac power wall adapter w/6ft. cord (Included) or will also accept customer supplied 24 Vdc @ 500 mA power (terminal block connection)
• Timing accuracy: Quartz accuracy (Factory calibrated)
• Manufacturer: DC-Digital, Made in the USA
• Warranty: 1 Year (optional extended warranty plan @ checkout)
Click Here for Specifications Sheet

Sensor: 

• Function: Diffused reflective, adjustable for up to 10ft.
• Control activation: Outputs both PNP and NPN, once object has been sensed output is triggered and holds until object moves out of sensor range. Connects to terminal 1 (Typical)
• Power: 12VDC @ 10mA (Supplied by display) 
• Mounting: Stainless bracket with (4) slotted .25" x 1.5" mounting holes and (1) Sensor mounting hole with nut
• Cabling: 6ft. wire whip pigtail, (4) 22ga. wires
• Additional cabling: 25ft. wire whip pigtail, (6) 22ga. wires, matches sensor wire colors
Click here for specifications

Remote Reset Switch:
• Function: Resets the display to zero
• Control activation: Momentary contact closure. Connect to terminal 2
• Mounting: Wet location 2 x 4 junction box, stainless steel switch plate, heavy duty 40mm palm switch
• Cabling: 25ft. wire whip pigtail, (2) 22ga. wires

How to Use

This timer can be used as an elapsed timer or stop watch
Customers who bought this item also bought
 

This store is powered by ShopSite web catalog software.
arrows